Tips for maximizing your whole house remodel

If you are looking forward to a whole house remodel or a second story addition, the tips mentioned below will be helpful to make the future work easier and to maximize the performance of your home. Keeping these tips in mind when dealing with your architect or local remodeling contractor will help you lower your stress and your costs during the remodel.

1. Consider water:
Do not add bathrooms without looking at the capacity of the water heater and your water supply carefully. A tank with lengthy times of recovery or just a smaller one might not meet your requirements. This can be true if you have a 40-gallon tank and you choose a brand new 70-gallon soaking tub. You can go for a different tank heater for your second story. If not, opt for a larger tank with a recirculation plum that preserves hot water in your taps.

2. The right gas meter:
When you have more gas appliances, you will need a bigger meter. Most of the utility providers may want you to add up the British thermal unit of your machines, i.e. washer dryer, furnace, barbecue, water heater, fireplace, etc. as well as the size of your meter. If you size up the meter and running pipe now, it may save up some cash in the future.

3. Reduce the noise:
Your friends might not be able to appreciate all the beautiful insulation in your walls, but they surely will admire to not hear noises from the powder room when you insulate your walls with sound insulation. You may choose soundboards or drywall insulation to deaden the transmission of sound through walls. You may even use resilient channels in your ceilings to stop sound transmission from a floor to another. In shared bedrooms, consider installing sound insulation around your media room and your laundry room.

4. Upgrade of your electrical panel:
Firstly, take a good look at the electrical panel you own. If every slot is filled and is of about 100 amperes, consider yourself as a prime candidate for a panel upgrade. Even when your electrical panel is 125 to 200 amperes, an updated kitchen, and additional rooms will require an upgrade of your panel. The code administers where the panels are to be and that certainly means not in the closet. If you still have outdated wiring, this can be a pleasant opportunity to ground all the outlets and run new wiring.

5. Ask your local remodeling contractor and architect about what they would do:
Contractors and architects are mostly focused on meeting the requirement that you have stated. However, asking them what they would do if it was their own house is likely to get some interesting suggestions. Your contractor and architect are business people. They have seen and know what works the best, what is worth dropping and what is worth changing altogether. If you ask questions like these, it will put your money in the right places and that will keep you from overspending on unnecessary items. To get in touch with local remodeling contractors visit: Homelyco.com